Concrete and clay tile roof repair, tile replacement, and tile lift & reset for Tucson homes. The visible tile is only one part of your roofing system — what's underneath it matters just as much.
Concrete and clay tile are durable, attractive roofing materials common throughout Tucson and Southern Arizona. But the tile itself is really the outer layer of a multi-part system — underneath it is the underlayment, flashing, and decking that actually keep water out. A tile roof can look fine on the surface while the components underneath are aging.
Both are long-lasting roofing materials common in this region. Individual tiles can crack or break from impact or age and are typically repaired or replaced without disturbing the whole roof.
The waterproofing layer beneath the tile. It typically has a shorter service life than the tile itself, which is why it's inspected separately — see our dedicated Tile Underlayment page.
Flashing at valleys, walls, and roof penetrations (vents, skylights, HVAC) are common areas where water intrusion starts if details deteriorate or were not installed correctly.
Ridge caps and the roof decking underneath everything are inspected as part of a full tile roof evaluation, particularly on older roofs or after storm exposure.
Where a tile roof meets a wall or parapet is another common area to check for proper flashing and sealant condition.
Heat, sustained UV exposure, monsoon rainfall, and thermal cycling (repeated heating and cooling) all affect how a tile roofing system ages over time.
When the underlayment beneath a tile roof needs attention but the tile itself is in usable condition, a full tear-off isn't always necessary. Tile lift & reset is a process where the existing tile is carefully lifted, the underlayment beneath it is addressed, and the tile is reset back into place.
Concrete and clay tile is a durable material, and tile in good physical condition can often be lifted, set aside, and reset once work on the underlayment is complete. Whether your existing tile is a good candidate depends on its actual condition at inspection — broken or badly worn tile may need to be replaced individually.
Not every tile roof needs the same scope of work. The appropriate solution depends on the condition of the existing underlayment, decking, flashing, and tile — which is why we start with an inspection rather than a one-size-fits-all recommendation.
It's a process where existing roof tile is carefully lifted so the underlayment beneath it can be addressed, then the tile is reset back into place — often avoiding the need to source and install entirely new tile.
Often, yes, if the tile is in sound physical condition. Individual cracked or broken tiles are typically identified during inspection and replaced as needed.
Visible cracked or displaced tile, staining on interior ceilings, or a roof that hasn't been inspected in several years are all reasons to have a professional take a look. A tile roof can look fine from the ground while underlying components need attention.
No. The appropriate scope of work depends on the actual condition found during inspection, not a blanket rule. See our Tile Underlayment page for more detail.
An inspection can help determine the actual condition of your tile roof and what scope of work, if any, makes sense.